Can I bolt a fence post to concrete?
If you’re mounting a fence to concrete, you’ll want to use metal fence posts. While some companies make metal post brackets to mount wood posts to concrete, a privacy fence built with metal posts can outlast a wood fence by decades.
How deep should a concrete spur be?
Lawsons experts recommend you should dig a hole which has a depth of 2 ft (24 in / 600mm) to ensure you have a stable timber or concrete fence post.
How deep should a concrete spur be repaired?
To fix the spur a hole must be dug out on one side of the fence approximately 2 feet in depth. A demolition bar may be required if the pervious concrete mix is hard to break when digging. Once the hole has been dug, check the bottom of the hole is level so the spur sits flat.
Who makes Metpost?
Beesley & Fildes are proud to supply Metpost Britain’s leading brand of fence post supports and fencing accessories. Their patented designs save you time, money and effort and ensure the end result is strong, durable and professional.
Is 2 feet deep enough for fence posts?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
What size Spurs to fix?
A repair spur is an alternative to complete replacement and can even be used on new fences if using wooden posts. Repair Spurs are available in two sizes: 1.2m x 100mm x 100mm or 1m x 75mm x 75mm.
How long do concrete post last?
Concrete is as sturdy and durable a building material as you’ll find. With just a minimal level of maintenance, concrete fence posts can last for around 25 years. However, they are not immune to wear and tear. Over time, wind and rain can cause concrete posts to chip and crack.
Can you fix to concrete fence posts?
It is possible to drill into a concrete fence post. With the proper tools and approach, it’s easier than you might think. There are some necessary things to take into consideration before you start drilling, such as the type of drills you will need and the specifications of your posts.
What is a concrete repair spur?
Concrete Repair Spurs are used to repair broken or rotted fence posts or they can also be used for bolting posts or timber frame work above the ground.
What do you put between wood and concrete?
Anyplace where wood meets the ground or concrete, the lumber must be pressure treated. For additional moisture protection, a gasket or strip of closed-cell foam can be installed between the concrete foundation and the sill plate.
Can you put pressure treated wood directly on concrete?
Wood in direct contact with concrete, and the dampness often found there, will rapidly decay. To avoid this, use pressure-treated lumber. This is wood impregnated with decay-resisting chemicals, usually chromated copper arsenates.
How long will a treated 4×4 post last in the ground?
A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil. There are a few factors that influence how long the 4×4 can last in the ground.
How do you attach wood to concrete without drilling?
A common way to secure wooden items to concrete without drill is by using epoxy glue systems. This glue is specifically manufactured for these problems. Before opting for this method, you need to thoroughly clean off and dry the wood for them to bond correctly.
How deep should a concrete fence post be?
Dig your hole to the correct depth, allowing for the height of the fence panel and the gravel board. As a rough guide the hole should be a minimum 1/3 the height of the fence, so a 6 foot fence would need an 8 foot post in a 2 foot deep hole. Similarly, the hole should be three times the diameter of the post.
How long does it take concrete to set in a post hole?
The concrete sets up in 20 to 40 minutes, so you can quickly move on to the next stage of the project (a great convenience when setting fence posts) or backfill the hole to finish the job. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.
How many bags of concrete do I need for a fence post?
1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.
How many bags of Postcrete do I need?
The exact amount of Post Mix Concrete needed will vary depending on the width and depth of the hole, but as a general rule you’ll need about one and a third bags for a standard fence post.
How do you fix rotting wood post without replacing it?
Wood fillers are products such as Bondo and Minwax that are designed to be all-purpose fillers for gaps, holes, and rotted wood. Their application is simple, they cure quickly, and they’re not supposed to shrink once dry.
Can you reuse fence posts with concrete?
Posts with concrete at the base are the most difficult to remove and reuse because the concrete base is larger than the post, which makes pulling it up through the ground much harder.
Are post spikes any good?
Fence post anchor spikes work well by allowing one to place and remove fence posts without having to dig large holes. A fence that uses fence post anchor spikes is just as stable as a fence with posts set in concrete, with the added benefit of minimizing the rotting of the fence posts.
