How do I find a break in my invisible dog fence?
On my unit, two wires run from the transmitter to the perimeter fence. Disconnect these wires from the transmitter and put the ends of a paper clip or small piece of wire into the jacks where the wires had been connected. If the alarm is silenced, the transmitter is working properly and you have a break.
How long does a dog fence last?
How long does the Invisible Fence wire last? Invisible Fence boundary wire is a direct burial grade wire and has a life expectancy of 27 years left undisturbed in the ground.
How much does a dog proof fence cost?
Most homeowners pay between $1,015 and $1,620. A low-end electric fence typically costs $400, while a high-end electric fence costs up to $1,900. This price typically includes the collar, charger, voltage, meter, and batteries.
How do you test an extreme dog fence?
To test it properly, you must approach the fence in one place, then go back into the center of the yard and walk back out to another spot. Walking parallel in the beep zone will not cause the collar to activate again. You have to walk in and then back out again to test.
How long do underground dog fences last?
Every hidden dog fencing system we offer comes with a full lifetime warranty. The buried wire is designed to last over 20 years underground and will not break by itself.
Why is my invisible fence not working?
Replace the Batteries If you hear the warning, but no light flashes, replace the battery. If you don’t have a tester, replace the battery and carry the collar past the boundary. If the problem was a dead battery, the collar should work properly when you approach the hidden boundary wire.
How much does DogWatch cost?
DogWatch is a pro line of dog fences, which means that the only way to buy this product is to contact the DogWatch installer who serves your local area. Pricing for DogWatch hidden fences varies by area, however, the DogWatch website lists the median price at $1450.
What type of fence is best for dogs?
Vinyl fences might be one of the best fences for dogs. First, they’re very durable. They are 5 times stronger than wood and won’t twist, warp, split, or rot. They last significantly longer than wood fences and often come with manufacturer warranties.
How do I reset my invisible fence?
Plug in the transmitter. The system and transmitter should reset automatically upon being plugged back in. Wait for a few seconds and look for any abnormality in the lights.
Can you splice underground dog fence?
When splicing the dog fence wire, all you need to do is twist the two exposed ends together, insert them into the gel-filled capsule and close the splice lock. The cylinder of the underground wire splice contains a mixture of silicone and grease, which helps to secure the waterproof connection.
Why is my dog fence beeping?
Why is my Invisible Fence control panel beeping? If your Invisible Fence control panel is beeping every second, the most likely issue is that you have a wire break somewhere on your property. These can be caused by digging too deep when working in the yard, burrowing animals, and even the weather.
What frequency does extreme dog fence use?
Radio Frequency Programming This programming option allows the user to switch the operating frequency from 7KHz to 4KHz in the unlikely case of signal interference from sources such as neighboring pet fencing systems.
Do wireless dog fences really work?
Many people think an invisible underground wireless electric fence is the best way to keep their dog in their yard. However, they are simply not as effective as you might think. Statistics suggest that invisible wireless electric fences are only about 70% effective.
How deep is an invisible fence buried?
In most cases, the wires should be buried in a trench that is between 1 and 3 inches deep; burying the wires at this depth allows adequate transmission of the signal, while protecting the wire from damage from lawn mowers and other activity on the lawn.
Are electric dog fences cruel?
Myth: Invisible Fence makes dogs aggressive. False. People often ask if electric fences make dogs aggressive, and the answer is no. Aggressive behavior is the result of poor training or misused correction levels.
How do I know if my PetSafe transmitter is bad?
To check if the transmitter is having issues you’ll need to disconnect the existing boundary wire and connect a short 15-foot section of boundary wire to run some tests. Make sure the 15-foot wire is spread out. The signal will cancel anywhere the wire is within 3 feet of itself.
How do you check an Invisible Fence battery?
You can position the test light tool on the collar probe and look for the light to flash. The higher the correction level, the brighter the light will shine on the test light tool. If the collar beeps once you reach the boundary, or the test light illuminates, the battery and the collar work.
What does blinking green light mean on Invisible Fence?
When you first insert the battery into your receiver, the status light will flash green. This indicates that the receiver has started properly. In the event that the lights do not flash, check the battery to be sure that it has been inserted properly.
Which is better DogWatch vs Invisible Fence?
One of the most significant differences between DogWatch and Invisible Fence products is the receiver battery life. DogWatch batteries last much longer, saving you money and hassle over time. Unlike Invisible Fence, our batteries are standard sizes so you can buy them from us or elsewhere.
Does Invisible Fence hurt dogs?
Hidden fences are safe for all dogs and cats, and they won’t hurt your pet. The correction a dog receives from a dog fence or other “shock collar” is actually not a shock at all. Unlike the shock you feel when you touch a physical electric fence, the correction from a dog collar is generated by a battery.
