What is the difference between a lawn edger and a lawn trimmer?
String trimmers are used to trim the grass in tight spots that a lawn mower can’t reach, like along a fence, under decks or near delicate plants and shrubs. On the other hand, lawn edgers are used to clean up borders along sidewalks and driveways.
What is an edger good for?
Give your yard a crisp, clean, manicured look with one of these lawn edgers or edging accessories. Lawn edgers allow you to easily and accurately cut a deep notch where your grass meets the sidewalk, driveway, curb, or patio—giving your lawn a professional and polished look.
What does an edger cost?
The Worx 2-in-1 Cordless 12-inch grass trimmer/edger costs just over $100 and earned a 4.5-star rating on Amazon.
Do you need a trimmer and edger?
Lawn edgers are designed to cut edges and create boundary lines, whereas a string trimmer is designed to maintain those boundary lines. They make a great team! Both can help your lawn to look sharper.
Do edger blades need to be sharpened?
No they don’t need sharpening. All edger blades are like these. They have sguared edges. They are just pressed metal blanks.
What’s better straight or curved trimmer?
As a result, curved shaft trimmers are generally less durable and less suitable for long hours of use than straight shaft trimmers, though braided cables provide some reinforcement. Also, all cable drives on curved string trimmers turn clockwise.
Does an edger take regular gas?
Our units run on 87 octane regular unleaded gasoline. You can use gasoline which is blended with a maximum 10% alcohol. Never use E85 or diesel fuels. Remember to use fresh gasoline and to mix it with the recommended 2-cycle oil.
How often do you replace edger blades?
When should I replace the edger blade? A: Edger blades vary in length from 8 to 10 inches when new, so you should be able to go through a season without replacing the blade. However, if you are using your edger more frequently, performance will start to deteriorate after the blade reaches half its original size.
How do I sharpen my edger?
The quickest way to sharpen a lawn edger blade is to use a bench grinder or an angle grinder. You can use a sharpening file to sharpen the blade in a more precise manner, or to perform quick tune-ups on the blade.
What kind of steel are edger blades?
Re: Anyone know steel content of edger blades the Craftsman blades are a medium-high carbon steel, roughly the same steel as an axe blade or lawnmower blade. It isn’t tempered very hard. It is actually quite soft.
What does CC mean in trimmers?
The rating for volts on a cordless trimmer and cubic centimeters (cc) on a gas trimmer indicates power output. Two-cycle engines on gas trimmers offer a good balance of power and weight but run on a blend of oil and gasoline.
What’s better 2 cycle or 4 cycle trimmer?
Although 4-stroke string trimmers have a reputation for lower emissions, better fuel efficiency, and high torque output, 2-stroke trimmers have their own advantages: Lighter weight. Easier maintenance.
Do you trim before cutting grass?
Step 1: Trim first. If you use a string trimmer, use it before mowing. The mower will chop the trimmings and reduce the need for raking. Do not use line trimmers to cut grass against the bark of trees.
Can you use an edger on flower beds?
Your soil is easier to dig into when it’s damp. Place the edger at a 90 degree angle and push it down into the flower bed. This will prevent grass from growing into the bed. Rock the edger back and forth to loosen the dirt.
Is it okay to cut wet grass?
It’s always best to let the grass dry before mowing it. When mowing grass, however, keep in mind that only a third or less of the grass blades should be cut. If the grass stays wet for long periods of time and continues to grow, it’s OK to mow the wet grass to keep it from growing too tall and going to seed.